Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

Fire and Smoke Dampers, Illustrated: For the Damper Certification Exam Every Damper in the Same 5 Steps

Identify, access, inspect, test, document: the same 5 steps for every fire, smoke and combination damper. One topic per page: first the drawing, then the numbers you need to remember. 62 illustrated pages.

SHOW ME EVERY DAMPER, DRAWN

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEach damper and each test drawn, with the explanation right beside it
62 illustrated pages8 parts, from why dampers exist to exam prep
Up-to-date sourcesNFPA 80, NFPA 105 and UL 555/555S
PDF by emailFormat

Look Inside the Book

Every page has one big drawing and a box with the numbers and steps you need to know:

A rated wall holds fire in one compartment. Every duct through it is a hole, and the damper closes it.
A rated wall holds fire in one compartment. Every duct through it is a hole, and the damper closes it.
Fusible link: code minimum 160 °F, factory standard 165 °F, common option 212 °F.
Fusible link: code minimum 160 °F, factory standard 165 °F, common option 212 °F.
Corridor dampers: UL 555 + 555S, 1-hour rating, close at 150 fpm.
Corridor dampers: UL 555 + 555S, 1-hour rating, close at 150 fpm.
Smoke dampers: at the barrier or within 24 in. (610 mm), ahead of any branch.
Smoke dampers: at the barrier or within 24 in. (610 mm), ahead of any branch.
Five check points from actuator to blade, numbered in the order you inspect.
Five check points from actuator to blade, numbered in the order you inspect.
Drop test: remove the link, confirm full closure and latch, reset, reinstall a same-rated link.
Drop test: remove the link, confirm full closure and latch, reset, reinstall a same-rated link.
Damper tests: at acceptance, 1 year later, then every 4 years (6 in buildings containing a hospital).
Damper tests: at acceptance, 1 year later, then every 4 years (6 in buildings containing a hospital).
165 °F, 1½ and 3 hours, 24 in., ½ in., Class I-II-III and the 1-4-6 year rule
165 °F, 1½ and 3 hours, 24 in., ½ in., Class I-II-III and the 1-4-6 year rule

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 8 parts and 58 topics.

The Problem Isn't You. It's How It Was Explained to You.

You're on the ladder with a smoke damper in front of you, and the submittal says Class II. You know it seals. You're not sure what that class actually means.

The manual gives you a paragraph on leakage ratings, a test pressure in inches of water gauge and a table of cfm per square foot. Three classes, three numbers, nothing to picture.

Corridor dampers: UL 555 + 555S, 1-hour rating, close at 150 fpm.

In the book, that same damper is one page: the blades with their edge and jamb seals drawn in section, and three boxes side by side. Class I 8, Class II 20, Class III 80 cfm/ft², all at 4 in. w.g.

The fusible link, the 24-inch rule, access doors, the drop test and the testing intervals work the same way: each one has its own page.

You look at the page, you get it, and you finish the inspection without going back to the manual.

COMPARE FOR YOURSELF

The Same Topic, Two Ways to Study It

THIS
  • The manual: line after line of text
  • Fusible links explained only in words
  • You show up to the exam with doubts
The heat-responsive element of a fire damper, generally a fusible link composed of two metal plates joined by a solder alloy of predetermined melting point, is selected on the basis of the minimum temperature permitted by the applicable code, 160 °F, and of the conditions expected within the duct. The common factory rating is 165 °F; higher ratings such as 212 °F may be specified where ambient temperatures are elevated. Upon fusing of the alloy, the link separates and releases the blade assembly, which closes by gravity or spring force and locks in position.
FOR THIS
  • The fusible link in one drawing
  • 160 °F minimum, 165 °F standard, 212 °F for hot spaces
  • Melt, release, close, latch: one arrow each
Fusible link: code minimum 160 °F, factory standard 165 °F, common option 212 °F.
CONTENTS

Take a Look at the 8 Parts and 58 Topics

Why dampers exist, inside each damper, installation, identify and access, inspect, test, document, and review and exam prep: 62 pages, all illustrated

IWhy Dampers Exist · pp. 5-11
  1. Compartments: The Building Is a Set of Boxes
  2. Fire Damper, Smoke Damper, Combination: Three Different Jobs
  3. Ratings: 1½ Hours and 3 Hours
  4. The Code Map: Who Says What
  5. The AHJ and the Edition That Applies
  6. Where Dampers Are Required
  7. The Label: What It Tells You at a Glance
IIInside Each Damper · pp. 12-20
  1. Curtain Fire Damper: Folded Blades and Gravity or Springs
  2. Multi-Blade Fire Damper
  3. The Fusible Link: 165 °F as the Standard
  4. Static vs Dynamic Fire Dampers
  5. Smoke Damper: Blades, Seals and Leakage Class
  6. Actuators: Electric, Pneumatic and Spring Return
  7. Combination Damper: Heat Sensor and Reset
  8. Ceiling Radiation Dampers
  9. Corridor Dampers
IIIHow a Damper Is Installed · pp. 21-28
  1. The Sleeve: The Damper Lives in It
  2. Retaining Angles: Both Sides of the Wall
  3. Expansion Clearance Between Sleeve and Wall
  4. Breakaway Connections
  5. Vertical vs Horizontal Mounting
  6. Smoke Dampers Within 24 Inches of the Barrier
  7. Access Doors and the ½-Inch Label
  8. Controls: Duct Detectors, Fire Alarm and Wiring
IVSteps 1–2: Identify and Access · pp. 29-34
  1. The 5-Step Field Order
  2. Reading the Damper Schedule and Life Safety Plan
  3. Tags and Numbering
  4. Finding the Damper Above the Ceiling
  5. Before You Climb: Safety and Coordination
  6. Getting Through the Access Door
VStep 3: Inspect · pp. 35-42
  1. Frame and Track
  2. Blades and Seals
  3. The Fusible Link Check
  4. Sleeve, Angles and the Wall Penetration
  5. Actuator and Linkage
  6. Obstructions in the Blade Path
  7. Latch and Closure Hardware
  8. What Counts as a Deficiency
VIStep 4: Test · pp. 43-50
  1. The Drop Test: Open, Release, Close, Reset
  2. Testing a Static Damper: Fans Off
  3. Testing a Dynamic Damper: Fans On
  4. Smoke Damper Operational Test
  5. Combination Damper: Testing Both Functions
  6. Smoke Control Systems: Timing and Position
  7. Testing Intervals: Acceptance, 1 Year, Then Every 4
  8. After Repairs: Retest Before You Leave
VIIStep 5: Document · pp. 51-56
  1. What Every Damper Record Contains
  2. Photos That Prove the Test
  3. Writing a Deficiency So It Gets Fixed
  4. Inaccessible and Not Found Dampers
  5. Keeping Records for the Survey
  6. Signing the Report
VIIIReview and Exam Prep · pp. 57-62
  1. Numbers to Know on One Page
  2. Fire vs Smoke vs Combination: The Confusions
  3. Static vs Dynamic, Type A vs B vs C
  4. The 5 Steps in One Drawing
  5. Glossary of Damper Terms
  6. Pre-Exam and Pre-Job Checklist

One Page, One Topic, All Clear

Think of it this way:

You're up the ladder, the access door is open and the fusible link is in your hand. The next move has to be the right one.

You open the drop test page and it's drawn in four moves: remove the link, watch the blades close and latch, reset, put back a link with the same rating.

Five check points from actuator to blade, numbered in the order you inspect.

Same with the fusible link, smoke damper leakage, the 24-inch rule, access doors and testing intervals: each one sits on its own page.

Fire and Smoke Dampers Illustrated is 8 parts and 58 topics, all drawn, and it ends with every number on one page, the 5 steps in one drawing and a pre-exam checklist.

What you see drawn, you don't have to memorize.

What's Inside Fire and Smoke Dampers Illustrated:

Ipp. 5-11

Why Dampers Exist

Compartments, the three damper types and their jobs, 1½ and 3 hour ratings, the code map, the AHJ, where dampers are required and how to read the label.

IIpp. 12-20

Inside Each Damper

Curtain and multi-blade fire dampers, the fusible link, static vs dynamic, smoke dampers and leakage class, actuators, combination dampers, ceiling radiation and corridor dampers.

IIIpp. 21-28

How a Damper Is Installed

The sleeve, retaining angles, expansion clearance, breakaway connections, mounting, the 24-inch rule for smoke dampers, access doors and controls wiring.

IVpp. 29-34

Steps 1–2: Identify and Access

The 5-step field order, damper schedules and life safety plans, tags, finding the damper above the ceiling, safety before you climb and the access door.

Vpp. 35-42

Step 3: Inspect

Frame and track, blades and seals, the fusible link, sleeve and wall penetration, actuator and linkage, obstructions, latches and what counts as a deficiency.

VIpp. 43-50

Step 4: Test

The drop test, static and dynamic testing, smoke and combination damper tests, smoke control timing, testing intervals and retesting after repairs.

VIIpp. 51-56

Step 5: Document

What every record contains, photos that prove the test, writing deficiencies, inaccessible dampers, keeping records for the survey and signing the report.

VIIIpp. 57-62

Review and Exam Prep

Numbers to know on one page, the common confusions, static vs dynamic and Type A, B, C, the 5 steps in one drawing, a glossary and a pre-exam checklist.

At the end of the book: Every number on one page, the 5 steps in one drawing, a glossary and a pre-exam checklist.

Plus: 2 Free Books

Damper Technician Practice Questions: Exam-Style, with Answers

BONUS 1: «Damper Technician Practice Questions: Exam-Style, with Answers»

Value on its own: US$ 17.90

Test yourself on damper types, installation, testing and reports, and see why each answer is right before the real exam.

The 15 Most Common Damper Mistakes, Before and After

BONUS 2: «The 15 Most Common Damper Mistakes, Before and After»

Value on its own: US$ 14.90

See the errors that show up most often in the field and on reports, each drawn wrong and then right, so you can spot them at a glance.

Fire and Smoke Dampers Illustrated with 2 Free Books

  • Fire and Smoke Dampers Illustrated: 62 illustrated pagesUS$ 63
  • BONUS 1: Damper Technician Practice Questions: Exam-Style, with AnswersUS$ 17.90
  • BONUS 2: The 15 Most Common Damper Mistakes, Before and AfterUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT FIRE AND SMOKE DAMPERS ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you Fire and Smoke Dampers Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You're studying for the damper certification

You're studying for the damper certification

You get the whole job in one order: type, how it closes, how it's installed, how it's tested, how it's documented. Each topic on one drawn page.

Your exam date is set

Your exam date is set

The review part puts every number on one page and the confusions side by side, so you go over it in the evenings and walk in knowing where everything is.

You already inspect dampers

You already inspect dampers

Print the pages you need and keep them in the truck: the drop test, the intervals and how to write a deficiency, always in the same order.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT FIRE AND SMOKE DAMPERS ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try Fire and Smoke Dampers Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for my damper exam, and is it beginner level?

It covers what US fire and smoke damper inspection and testing exams ask about: damper types, installation, testing under NFPA 80 and NFPA 105, and documentation. Compare the open index on this page with your program's outline. It doesn't start you from zero: it puts what you already do in the field into one order and adds the why behind each step.

Is it for the US damper exam, and is it up to date with the code?

Yes, it's written for US practice, in inches, °F and in. w.g., from NFPA 80, NFPA 105, NFPA 90A, International Building Code Section 717, the International Mechanical Code, the UL 555 and UL 555S test standards and manufacturers' listed installation instructions. Your AHJ may enforce an edition other than the latest one, so every number and interval names the standard it comes from: check it against the edition adopted where you work.

Is it official material?

No. It's an independent illustrated study book. It is not affiliated with or endorsed by NFPA, ICC, UL, ICB, TABB or any certification body.

Does it give me the certification or replace the course?

No. It's a study and review book: the certification comes from the certifying body, after you pass their exam. It doesn't replace your course, field experience, the manufacturer's instructions or what your AHJ requires.

Are the practice questions the ones on the exam?

No. They're written for this book, in exam style, to help you check what you know. They aren't official questions from any exam.

When and how do I get it?

In PDF, by email, at the address you enter at checkout. The book and the 2 bonus books come together.

Do I have to pay every month?

No. It's a one-time payment. No subscription.

Can I have it on paper?

Yes. The PDF is made to print: print the whole book or just the pages you want to take to the job.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading the standard with nothing sticking.

The drop test, you see it drawn and you're set.

You walk into the exam knowing where everything is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT FIRE AND SMOKE DAMPERS ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.